User's Manual

6-16
Using
Options Menu
Right-click the floating button to open the options menu.
Menu Items Descriptions
14443-A / 14443-B /
15693 / Auto
Check one of the three tag types for single type
scanning. Check Auto to scan all three types.
Send UID out Check this item for the UID data to be entered to
where you have placed the insertion point (or called
cursor) in a processing software.
If unchecked (default setting), the result window
appears to display the UID data.
Keep scanning Check this item for the scanning to go on until you
stop it by tapping the floating button.
If unchecked (default setting), the scanning stops
automatically after one cycle of scanning.
No Beep Check this item so there is no beep sound upon each
scanned UID.
If unchecked (default setting), the system beeps to
indicate a scanned UID.
Information Provides extra information such as hardware port,
firmware version, etc.
Exit Closes the program.
All the changes remain effective until you change them again.