User's Manual

Installing a SIM Card
To use the 3G feature (GSM/UMTS/EDGE/GPRS/EVDO/HSUPA) on your
computer, you need to subscribe to 3G service and install the 3G SIM card
from your service provider, network operator, or other vendor.
To install the SIM card, follow these steps:
1. Make sure that the computer is not turned on or connected to AC
power.
2. Open the media bay cover by sliding the release latch towards the left.
3. Press upward the optical drive release latch () and carefully pull on the
ribbon strip () to remove the optical drive from the media bay.
4. Carefully place your computer upside down and locate the SIM card slot.