User's Manual

BIOS Setup
When to Use
You need to run BIOS Setup Utility when:
 You see an error message on the screen requesting you to run BIOS
Setup Utility.
 You want to restore the factory default BIOS settings.
 You want to modify some specific settings according to the hardware .
 You want to modify some specific settings to optimize the system
performance.
Starting BIOS Setup



To run BIOS Setup Utility, press the Enter key or click the left touchpad
button when the prompt appears on the screen during system startup. The
prompt shows up on the screen for only a few seconds. You must press the
Enter key or click the left touchpad button quickly. A small window appears,
select Launch System Setup. The BIOS Setup Utility main screen appears as
shown next.