User's Manual
Table Of Contents
- Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Battery Problems
- CD/DVD Drive Problems
- Display Problems
- Floppy Disk Drive Problems
- Hardware Device Problems
- Hard Disk Drive Problems
- Infrared Problems
- Keyboard and Mouse Problems
- LAN Problems
- Modem Problems
- PC Card Problems
- Power Management Problems (for Windows)
- Printer Problems
- Software Problems
- Sound Problems
- Startup Problems
- Other Problems
- Resetting the Computer
Troubleshooting 8-7
Simultaneous display does not work.
!
Make sure that you turn on the external monitor before turning on
the computer.
!
Check the Setup item Display Mode on the Main menu of the SCU
program is configured correctly.
Floppy Disk Drive Problems
The Floppy Disk Drive In-use Indicator stays on.
!
Make sure that the floppy disk is not physically damaged.
!
Make sure that the floppy disk is inserted correctly.
The disk drive cannot write to a floppy disk.
!
Make sure that the floppy disk is formatted.
!
Make sure that the floppy disk is not write-protected.
!
Make sure that you are writing to the correct drive.
!
Make sure that there is enough space left on the floppy disk.
!
Make sure that the floppy disk is not physically damaged.
The disk drive cannot read a floppy disk.
!
Make sure that the floppy disk is formatted.
!
Make sure that you are reading the correct drive.
Hardware Device Problems
The computer does not recognize a newly installed device.
!
The device may not be correctly configured in the SCU program.
Run the SCU program to identify the new type.
!
Make sure if any device driver needs to be installed. (Refer to the
documentation that came with the device.)