User's Manual

ManualsBrandsGetac Technology ManualsComputers & AccessoriesTablet PC

Table Of Contents

Installing Software Drivers
- How to Use the CD
- Other Drivers and Utilities
  - 0VMAKFIL Utility

CHAPTER

Installing Software Drivers

To take full advantage of the unique features of your Tablet PC, some

operating systems require custom software, known as drivers, to be

installed.

If you purchased the Tablet PC with Windows pre-installed, your dealer

may have already installed the drivers. If not, you need to install the

drivers using the CD supplied with your Tablet PC.

This chapter describes how to install the drivers.

Summary of content (4 pages)

PAGE 1
CHAPTER 6 Installing Software Drivers To take full advantage of the unique features of your Tablet PC, some operating systems require custom software, known as drivers, to be installed. If you purchased the Tablet PC with Windows pre-installed, your dealer may have already installed the drivers. If not, you need to install the drivers using the CD supplied with your Tablet PC. This chapter describes how to install the drivers.
PAGE 2
How to Use the CD NOTE: • The drivers may have been updated after this manual was published. For drivers upgrade, please contact your dealer. • You can always find README or document files on the CD. These files contain the latest information from the software supplier. Please read the files together with this chapter. NOTE: • This CD supports Windows 98, Windows 2000, and Windows NT 4.0. Other systems are not supported. • The available items may differ according to your computer model and operation system.
PAGE 3
! Power Profile driver NOTE: If you are using Windows 98 or Windows 2000, you will not need to install this driver. Please refer to the Readme file on the CD for the installation instructions.
PAGE 4
Other Drivers and Utilities 0VMAKFIL Utility CAUTION: Check with your dealer to find out if the Suspend-to-disk file (partition) is already created. If it is not created and you want to create the Suspend-to-disk file by yourself, make sure that your hard disk is empty. That is, your hard disk has not been partitioned by the FDISK program. If any partition exists, you have to use the FDISK program to delete all partitions before you can use the 0VMAKFIL utility. The 0VMAKFIL.