User's Manual

7-28
Using Getac Software
Manual
(default)
Data are entered only upon your
request.
Auto
Data are entered after a specific
time lapse (determined by the next
item).
Time Lapse
Before Entry
Sets how many seconds (4, 2, or 1) the program
waits before entering the decoded data into
the processing software. The default setting is 4.
This item is available for setting only when the
above item is set to Auto.
Camera Switch
Switches to the Front (default) or Bottom camera
lens. The latter is available for selection only on
computer models with two cameras.
Sound Effect
Turns on (default) or off the sound that indicates
completion of data entry.
System
Operating
Mode
Positions the toolbar at the left or right (default)
side of the main screen.
To restore default settings, tap the Default button.
To save any changes you have made, tap OK. All the changes remain
effective until you change them again.
If you want to leave without applying any changes, tap Cancel or
.