User's Manual

Troubleshooting 9-7
 Make sure that the LAN cable is properly connected to the RJ-45
connector and the network hub.
 Make sure that the network configuration is appropriate.
 Make sure that the user name or password is correct.
Modem Problems
The modem does not work.
 Make sure that the modem driver is correctly installed.
 Make sure that the telephone line is properly connected.
 Make sure that the COM port in the communication software is
correctly set.
 Turn off power management.
PC Card Problems
The PC card does not work.
 Make sure that the PC card controller driver is correctly installed.
 Make sure that the PC card is correctly seated.
 If the card requires an IRQ (Interrupt ReQuest), make sure that there is
one available.
The PC card stops communicating properly.
 The application may have been reset when the computer is turned off
or in Sleep/Standby mode. Exit and restart the application.
Power Management Problems
The computer does not enter Sleep/Standby or Hibernation mode
automatically.