User's Manual

Operating Your Computer 2-21
4. To install the card, match the notched part of the card with the
socket’s projected part, and firmly insert the card into the socket
horizontally.
5. Secure with two screws.
6. Connect the antenna cable (see label for the correct one) to the
“MAIN” and “AUX” antenna connectors on the card.
7. Close the compartment cover and secure with two screws.
Turning Off/On the WLAN Radio
NOTE: The FAA (Federal Aviation Agency) has deemed it unsafe to operate wireless
devices in aircraft as this may interfere with flight safety. Remember to turn off wireless
LAN when using your computer in the airplane.
Your computer has a built-in Fn+F2 WLAN hot key to switch the WLAN
on/off (see “Hot Keys” in Chapter 2).
If you need to temporarily turn off the radio, press
Fn+F2. To resume
network connection, press
Fn+F2 again.
It takes approximately 30 seconds for your computer to make a successful
WLAN connection and approximately 10 seconds to disconnect.
Connecting to a Wireless Network
To connect to a wireless network:
1. Make sure that the WLAN radio is on (controlled by
Fn+F2).
2. Click Start and then Programs.
3. Click Intel PROSet Wireless and then Intel PROSet Wireless.