User's Manual

4
3. Follow the onscreen instructions to complete the setup wizard. You will then
see the Today screen.
Connecting to AC Power and Charging the Battery
Fully charge the battery before starting to use your Pocket PC for the first time.
1. Fit the converter plug to the AC adapter (
n
). Connect the DC jack end of the
AC adapter to your device (
o
) and the other end to a wall outlet (
p
).
2. The multi-functional indicator glows amber when charging is in progress.
Do not disconnect your Pocket PC from AC power until the battery is fully
charged. This will take a couple of hours. When charging the battery for the
very first time, charge it for at least 8 hours.
Whenever possible, keep your Pocket PC connected to the AC adapter and a
power source. Doing so keeps the battery charged.
CAUTION: For optimal performance of the lithium battery, take note of the following:
z Use the included power adapter (for use with power supply model PC11R-050).
z Do not charge the battery where the temperature is high (e.g. in direct sunlight).
z There is no need to fully discharge the battery before charging. You can charge the
battery before it is discharged.
z If you will not use the product for a long period of time, be sure to fully charge the
battery at least once every two weeks. Over discharge of the battery can affect the
charging performance.
NOTE: Your Pocket PC can also be charged when it is connected to a desktop computer
via the USB cable.
1.3 Turning Your Pocket PC On and Off
After the initial startup, your Pocket PC enters a suspend state when you turn it
off and resumes when you turn it on.
Turning Off to Suspend
You suspend your Pocket PC by briefly pressing the power button.