User Manual

Key Description
Switches the display output to one of the following when an
external de
vice is connected.
Upon booting the system with CRT:
LCD CRT
LCD & CRT
NOTE:
 Fn+F9 will not work when playing a DVD/MPEG movie.
 Using the VGA utility’s “Graphics Properties” to switch the
display output is not allowed.
 Display switching when in full screen (maximize view)
DOS mode is not allowed.
 If the display mode is set to 256 colors or lower, or in DOS
mode, there will be only two modes for selecting: CRT only
and LCD & CRT.
 This function only applies to Plug & Play CRT monitors.
Serves as the sleep button that yo
u can define with Windows’
Power Management. (See the “Power Management” in
Chapter 3.)
Switches the wireless LAN radio on and off.
Switches the optional GPS function on and off.
2-8 Operating Your Computer