User's Manual

Regulatory Information B-6
On the Use of the RF Device
NOTE: The information in this section applies to models with the wireless LAN module.
USA and Canada Safety Requirements and Notices
IMPORTANT NOTE: To comply with FCC RF exposure compliance
requirements, the antenna must not be co-located or operating in
conjunction with any other antenna or transmitter.
INDOOR USE ONLY in 5.15–5.25 GHz band: For 5.15–5.25 GHz band, U-NII
devices will be restricted to indoor operations to reduce any potential for
harmful interference to co-channel MSS operations
.
Radio Frequency Interference Requirements and SAR
The FCC with its action in ET Docket 93-62 has adopted a safety standard
for human exposure to Radio Frequency (RF) electromagnetic energy
emitted by FCC certified equipment. The wireless LAN module meets the
Human Exposure limits found in OET Bulletin 65, 2001, and ANSI/IEEE
C95.1, 1992. Proper operation of this radio according to the instructions
found in this manual will result in exposure substantially below the FCC’s
recommended limits. The following safety precautions should be observed:
z Do not disassemble to gain access or touch the radio transmitter or it’s
antenna for any purpose.
z Do not operate the radio or attempt to transmit data unless the antenna
is connected; if not, the radio may be damaged.