User's Manual

Operating Your Computer 2-11
Using the Active Digitizer Feature
NOTE:
l This function is not available if your computer comes with the touchscreen
function.
l Make sure the digitizer driver has been installed properly (see chapter 6 for
details).
CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the LCD
display. Doing so may damage the display surface. Use your finger or the included
digitizer pen (option).
The active digitizer feature allows you to easily use the computer without a
mouse, keyboard, or touchpad to communicate with the computer by
controlling the location of the pointer on the screen and making selection with
the buttons.
When using the digitizer pen, be sure to install the included size “AAAA”
battery and press on the button on the side.
Here are some common terms that you should know when using the active
digitizer feature:
Term Action
Click/Point Tap gently on the display.
Double-click Tap twice on the display rapidly.
Drag and
drop
Press lightly on the display and move your finger until you
reach your destination (drag). Finally, release your finger
(drop) when you finish dragging your selection to the
destination. The object will drop into the new location.