User Manual

SetupConfiguration Utility
3-12
Power-on Password allows you to set the password for your
system. When typing Power-on password, first make usre that Num
Lock is off, then type your Power-on password in the entry fields and
press Enter. Confirm your Power-on password by typing it again and
pressing Enter. If the Enable Password to Power-on sub-item is
enabled, the set Power-on password is always required to boot the
computer.
SCU Password allows you to set the SCU Password for your
system.
When type your SCU Password in the entry fields and click “OK”
button. Confirm your SCU Password by typing again and press Enter.