User Manual

SetupConfiguration Utility
3-6
Keyboard Backlight
When the LED Keyboard Backlight need light at power on status, then
select the “Keyboard Backlight “ setting is Enable.
When the LED Keyboard Backlight need dark at power on status, then
select the “Keyboard Backlight “ setting is Disable.
The Fn+ F8 function can toggle Backlight of the keyboard light or dark, but
Fn+F8 can’t effect the CMOS Setup of the “Keyboard Backligt” item.
Primary HDD Heater
Set “Primary HDD Heater” function Enable/Disable, detail information see the
HDD Heater User Guide.