User Manual

Operation
2
-
3
2-2.3 Opening the PCMCIA/FDD/CD ROM/DVD/COMBO
/DVD RW Door
Open doors only when it is required to access components behind them.
To open a door:
1. Insert a small flat edged object (a small sized screwdriver or the edge of a
small coin) into the slot of one of the cptive screws securing the access door.
2. Turn the screw counter-clockwise until it comes loose from its socket.
3. Repeat steps 1 and 2 for each screw securing the access door.
4. Use the handle to open the access door. If the access door does not have a
hanele, use one of the loosened screws to pull open the door.
Figure
2
-
2
Opening a Door