User's Manual
Table Of Contents
- 1
- 1-1 Introduction
- 1-2 System Description
- 1-3 System Configuration
- 1-4 Unpacking
- 1-5 Notebook Features
- 1-5.1 Cover
- 1-5.2 Display
- 1-5.3 Power Switch
- 1
- 1-5.4 Keyboard
- 1-5.5 Pointing Device
- 1-5.6 Volume Control
- 1-5.7 Brightness Control
- 1-5.8 Keyboard Backlight (Option for Sound Card)
- 1-5.9 CRT/LCD/Simulscan Toggle
- 1-5.10 Panel On/Off
- Standby Mode
- 1-5.12 Suspend Mode
- 1
- 1-5.13 Status Row
- 1-5.14 Battery Pack
- 1-5.15 Low Battery Indication
- 1-5.16 Battery Charger
- 1-5.17 CHARGE LED Indicator Status
- 1-5.18 Diskette Drive and CD-ROM
- 1-5.19 PCMCIA Slot and Diskette Drive and CD-ROM Door
- 1-5.20 PCMCIA Slots
- 1-5.21 VGA Port
- 1-5.22 Serial Port
- 1-5.23 Printer Port
- 1-5.24 Port Replicator Port
- 1-5.25 IrDA Port
- 1-5.26 USB Port
- 1-5.27 Keyboard/Mouse Port
- 1-5.28 External Power Source Port
- 1-5.29 External Power Adaptert
- Reed Switch
Rev.00 1-9
1. Α.When the power is on, then Power LED (Green) is on.
2. Α.When the AC power adaptor is connected, then the AC IN LED
(Green) is on in power stage.
Β.When charging is in progress, then the CHARGE LED (Orange) is
on in power on and off stage. When the battery is fully charged, the
CHARGED LED (Orange) goes out.
3. Α.When any battery pack is present, then the BATTERY LED
(Green) is on in power stage.
Β.When the optional battery pack ( Bay 1 or Bay 2) enters battery low
status, then the BATTERY LOW LED (Orange) is on. When if only
the primary battery and battery low status then speaker will beep.
4. Α.When the HDD, FDD or CD-ROM drive is active, then the
HDD/FDD/CD LED (Orange) is on.
5. The “Num Lock” key activates and deactivates the embedded numeric
keypad. When the numeric keypad is active, the “Num Lock”
indicator come on and the alphabetic of the embedded numeric
keypad are disabled.
Figure 1-5 A760T Status Row