User's Manual
Table Of Contents
- 1
- 1-1 Introduction
- 1-2 System Description
- 1-3 System Configuration
- 1-4 Unpacking
- 1-5 Notebook Features
- 1-5.1 Cover
- 1-5.2 Display
- 1-5.3 Power Switch
- 1
- 1-5.4 Keyboard
- 1-5.5 Pointing Device
- 1-5.6 Volume Control
- 1-5.7 Brightness Control
- 1-5.8 Keyboard Backlight (Option for Sound Card)
- 1-5.9 CRT/LCD/Simulscan Toggle
- 1-5.10 Panel On/Off
- Standby Mode
- 1-5.12 Suspend Mode
- 1
- 1-5.13 Status Row
- 1-5.14 Battery Pack
- 1-5.15 Low Battery Indication
- 1-5.16 Battery Charger
- 1-5.17 CHARGE LED Indicator Status
- 1-5.18 Diskette Drive and CD-ROM
- 1-5.19 PCMCIA Slot and Diskette Drive and CD-ROM Door
- 1-5.20 PCMCIA Slots
- 1-5.21 VGA Port
- 1-5.22 Serial Port
- 1-5.23 Printer Port
- 1-5.24 Port Replicator Port
- 1-5.25 IrDA Port
- 1-5.26 USB Port
- 1-5.27 Keyboard/Mouse Port
- 1-5.28 External Power Source Port
- 1-5.29 External Power Adaptert
- Reed Switch
Rev.00 1-8
If the user presses Fn+F5 or Fn+F6 to adjust the LCD brightness, and
continues adjusting it when it is already set to the the minimum or
maximum, it will still keep on beeping every time F5 or F6 is pressed
down.
1-5.8 Keyboard Backlight (Option for Sound Card)
The Backlight of the Keyboard is toggle from combination of function
keys Fn+F8.
1-5.9 CRT/LCD/Simulscan Toggle
The CRT/LCD/Simulscan toggle is changed from the combination of
fucntion keys Fn+F9.
1-5.10 Panel On/Off
The Panel on/off is toggle from the combination of function keys Fn+F10.
1-5.11 Standby Mode
The system enter standby mode press the function keys Fn+F11.
1-5.12 Suspend Mode
The system enter suspend mode press the function keys Fn+F12.