User's Manual
Table Of Contents
- 1
- 1-1 Introduction
- 1-2 System Description
- 1-3 System Configuration
- 1-4 Unpacking
- 1-5 Notebook Features
- 1-5.1 Cover
- 1-5.2 Display
- 1-5.3 Power Switch
- 1
- 1-5.4 Keyboard
- 1-5.5 Pointing Device
- 1-5.6 Volume Control
- 1-5.7 Brightness Control
- 1-5.8 Keyboard Backlight (Option for Sound Card)
- 1-5.9 CRT/LCD/Simulscan Toggle
- 1-5.10 Panel On/Off
- Standby Mode
- 1-5.12 Suspend Mode
- 1
- 1-5.13 Status Row
- 1-5.14 Battery Pack
- 1-5.15 Low Battery Indication
- 1-5.16 Battery Charger
- 1-5.17 CHARGE LED Indicator Status
- 1-5.18 Diskette Drive and CD-ROM
- 1-5.19 PCMCIA Slot and Diskette Drive and CD-ROM Door
- 1-5.20 PCMCIA Slots
- 1-5.21 VGA Port
- 1-5.22 Serial Port
- 1-5.23 Printer Port
- 1-5.24 Port Replicator Port
- 1-5.25 IrDA Port
- 1-5.26 USB Port
- 1-5.27 Keyboard/Mouse Port
- 1-5.28 External Power Source Port
- 1-5.29 External Power Adaptert
- Reed Switch
Rev.00 1-14
address.
1-5.23 Printer Port
The printer port (Item 3, Figure 1-7) is a 25 pin D-type interface, Usually
this interface supports a parallel printing device.
1-5.24 Port Replicator Port
The Port Replicator Port (Item 4, Figure 1-7) is an 80 pin interface, Expend
two SIO, two USB, two PS/2, PIO, VGA port.
1-5.25 IrDA Port
This infrared port (Item 5, Figure 1-7) complies IrDA, and ASK Standards,
which allow you to connect your notebook to an IR device wirelessly.
1-5.26 USB Port
The USB port (Item 6, Figure 1-7) transfers at 1.2 ir 1.5Mbit/sec.
1-5.27 Keyboard/Mouse Port
The Keyboard/Mouse port (Item 7, Figure 1-7) for IBM PS/2
keyboard/Mouse.
1-5.28 External Power Source Port
If the notebook will be in use for a long continuous period, connect an
external power source to the notebook here ( Item 8, Figure 1-7).
1-5.29 External Power Adaptert
The A760T external power adapter converts 100-240V, 50-60 Hz to
19VDC, 60 watts, CV mode for the notebook & expansion unit.