User's Manual

Rev. 00 2-9
2-4.1 Configuring the System
The notebook is configured in the factory. Run the SETUP
program when the computer boots for the first time to record the
system settings. For more details about configuring the system
and when to do it, see Chapter 3.
2-4.2 Installing Software Driver
Before you install your new software, make a backup copy of the
original program disk using the DOS Diskcopy command or the
Windows disk copy utility in file manager.
2.4.2.1 Installing PCMCIA TI 1225 Driver in
Windows 98
1. With Windows running, insert PCI 1225 Driver disk into drive A.
2. In the Windows program manager, select Run.... from the File
menu and type A:\Setup.exe. Press ENTER, or choose OK.