User's Manual

Rev. 00 2-14
6. If the cause is known and will not cause other difficulties, press
F1. To correct
the discrepancy, press F2 and change
configuration settings accordingly. See chapter 3 for details
about SETUP.
7. After the POST, the system checks for a system password.
If one is present, the computer prompts for its entry before
continuing. Carefully type it in.
NOTE
The password characters do not appear on the screen.
8. After password confirmation, the system tries to boot from
drive A first and then drive C.
9. Adjust brightness, and viewing angle for best appearance
and comfort.
2-5.2 Turning Off The Notebook
To turn off the notebook
1. Save all data and close all open programs.
2. Press the Power button to turn off power.
3. Swing the cover closed until it clicks shut.
4. Turn off and disconnect all peripheral devices.
5. Close and tighten all access doors and covers.