Operation Manual

MD60LOG User Manual rev. 05

ENGLISH

12 FIRMWARE UPDATING

The firmware of the MD60LOG is updated by way of a connection to a personal computer by way of a USB.

To carry out the updating, proceed as follows:

• Turn on the instrument and connect to a PC by way of the USB cable.

• Start up the firmware updating clicking the left mouse button on the self-starting file contained in the fw.

• Press the UPDATE button and stand by until the end of the updating procedure (please attempt that the

MD60LOG restart and show SYNC on the display).

WARNING: DON’T DISCONNECT USB CABLE UNTIL DEVICE IS RESETTED

• Disconnect the USB cable.

ATTENTION: USE CHARGED BATTERIES DURING THE FIRMWARE UPDATING. NON

COMPLIANCE WITH FIRMWARE UPDATE MAY LOCK THE DEVICE