Operation Manual

MD60LOG User Manual rev. 05

ENGLISH

11.3 SAVING A CUSTOM TRACK

After having created a track it is possible to proceed with its saving in the internal library of the MD60LOG.

The function is automatically activated when the lap timer stops (only if the procedure indicated in chap.

11.1 and 11.2 has been performed properly).

• From the CHRONO screen, when chronometer stopped (please remember that the unit mustn’t be in

DATA LOGGER mode) the track saving page will be displayed automatically.

• The options available (selectable by way of a brief pressing of the S button) are:

YES: enables the track created to be given a name and then saved to the unit's library.

Set the name pressing the ARROW, to scroll the different alphanumeric characters and briefly press the

S button to confirm the character entered. Continue until the name is completed. To exit from the

setting of the track name briefly press the S (SET) button on the special character “  ” (visible among

those used for the composition of the name of the track).

In the case of a name chosen that is already present in the library the track will be saved adding a

number at the end of the name selecting (for example setting MUGELLO, a name already present in the

library the track will be saved as MUGELLO1).

NO: turns off the unit without saving the track created.