Operation Manual

MD60LOG User Manual rev. 05

ENGLISH

10.2 DATA LOGGING FUNCTION

The DATA LOGGING function enables the user to record a session in the memory of the MD60LOG. This

function makes a series of data available (from the GPS) that enable an analysis of the trajectory, the speed

and the times of the lap with the MX2 LITE and MX2 software, providing the user the possibility of

understanding how to improve his or her driving performance.

The MD60LOG memory is capable of containing up to 4 hours of recording.

It is recommended that you regularly download the data using the specific software, before the memory of

your MD60LOG is used up entirely (visualisation of the message MEMFULL on the display).

Pressing the S (SET) button briefly, when the instrument is in the CHRONO screen the main menu page is

accessed.

• Scroll the main menu items with the ARROW button until the DATA LOGGING item is highlighted.

• Press the S (SET) button to activate the session recording mode: the instrument will display a screen

with the list of any sessions present in memory and the REC SESSION function.

If one intends on recording a session press the S (SET) button when the item REC SESSION is

highlighted by the cursor: the instrument will return to the CHRONO page beginning to record.

The user may, at any moment, decide to exit the DATA LOGGER menu pressing the S (SET) button

when the <<EXIT item is highlighted by the cursor.

NOTE: When beginning to record a session the data present in field 3 (GPS date and time) these are

substituted by the indication of the current session number (ex. SESSION 2) and by the memory

reserve indicator bar.

ATTENTION: SESSION RECORDING IS AVAILABLE ONLY WHEN THE INSTRUMENT PROPERLY

RECEIVES AT LEAST 5 GPS SATELLITES

• Select the REC SESSION item with the ARROW and confirm the choice with the S (SET) button: the

instrument goes to the screen displaying times and the message REC (in the date/time field) will

indicate that the unit is in recording mode. The field will darken progressively to indicate the level of

reserve internal memory.

In the event that the memory in the unit was to fill up, the MEMFULL message will appear in field 3 and

recording will be interrupted.

• To stop recording of the session, press the ARROW button: the item REC disappears and in its place

the current date and time appear again.

In the event that you would like to record a new session and the memory of the MD60LOG is exhausted the

unit will request the deletion of all of the previous sessions recorded: Download the data to your PC before

carrying out this operation or you will lose all of it.

SESSION NUMBER

MEMORY RESERVE

INDICATOR BAR