Operation Manual

DATA MANAGER - GET DATA ACQUISITION SOFTWARE rev. 01

ENGLISH

There are 2 tabs in the dialog window which appears: the first, Analysis options, allows the user to set the

following controls:

• Show horizontal cursor: to display a horizontal line at the point of intersection between the cursors and

the graphs in the analysis window.

• Show cursor info: to display a numerical box which shows the value (relative to the position of the cursor)

of the channel selected, when measurement mode is active.

• Show lap times: to display the time of each lap along the finish lines.

• Show lap times in the overview: to display the time of each lap in the overview window.

• Show split times: to display the vertical broken lines in the analysis window which identify the position of

split times.

• Unlock overview bar: allows the user to modify the position and dimensions of the overview window.

• Unlock track bar: allows the user to modify the position and dimensions of the track window.

The second tab, Colours and characters, allows the user to set the colour and characters used by the MX2

software.

3.2.16.8 Course window

The default position of the course window is in the bottom right-hand corner of the program window. In this

area, the image of the course associated with the session in use is displayed.

By pressing the button on the main toolbar, it is possible to enter trajectory analysis mode.

This function allows the user to compare the trajectories of laps selected on the Browser Bar inside the

course window (Track Bar): if only one lap has been selected, a single line will be displayed.