Operation Manual

DATA MANAGER - GET DATA ACQUISITION SOFTWARE rev. 01
2013 - GET by Athena Evolution - All rights reserved
ENGLISH
11
3.2.3 Main toolbar
The main toolbar is situated at the top of the program window and allows the user quick access to the most
commonly used software functions.
The toolbar is composed as follows:
A: displays the previous lap
B: displays the next lap
C: sets the manual/automatic alignment mode (useful when comparing several laps)
D: selects the X axis display scale
E: zoom in analysis window
F: zoom out analysis window
G: reset zoom on selected lap
H: zoom of the selected area or report of the maximum and minimum channel values of the selected area
I: sets the lap trajectory comparison mode (trajectory analysis mode)
L: enlarges the track loaded in the project
M: reduces the track loaded in the project
N: resets zoom 1:1 on the course
O: ruler tool (useful for performing measurements in the course window)
P: options window (useful for configuring the MX2 options)
3.2.4 Navigation bar
The default position of the navigation bar is on the left-hand side of the program window.
The navigation bar is composed as follows:
A: displays the browser window
B: displays the channel window
C: displays the report window
D: displays the course library
E: opens the Gate Setup Manager
F: opens the Gate Download Manager