Operation Manual

D30 EVO DASH rev. 1.0
2014 GET by Athena. All rights reserved
ENGLISH
9
5 D30EVO: SYSTEM CONNECTION
5.1 Wiring code GL-0092-AA
Connection scheme with general wiring, code GL-0092-AA:
WIRING TABLE
ITEM
COLOUR
DESCRIPTION
1
Brown
Positive supply + VBB
2
Blue
Ground supply – GND POWER
3
White
CAN bus – CANL
4
Green
CAN bus – CANH
5
Grey
Analogic input ground – GND SENSORS
6
Violet
Analogic input (0-5V) – AN1
7
Orange
Frequency input (0-12V) – DIN1
8
Light green
Ingresso Beacon – BEACON
NOTES:
• Cut the CAN BUS TERMINATION eyelet of the GL-0092-AA wiring if required for removing the internal
termination of the CAN bus.
• Singularly insulate the wires that are not used.
CAN BUS TERMINATION
VEHICLE
/
SENSORS
MAIN
SEE WIRING
TABLE
cod. GL-0092-AA

1
2
3
4
5
6
7
8
PROG. CONNECTOR (PC)