Operation Manual

D30 EVO DASH rev. 1.0

ENGLISH

1 ADVICES AND CAUTIONS DURING INSTALLATION

Before installing D30EVO dashboards on a vehicle, please follow the guidelines below:

• Perform assembly/disassembly operations in a place with adequate space.

• Then disconnect the poles of the vehicle’s battery.

• Any parts of the vehicle that may have been disassembled should be kept in a place where there is no

risk that they might be damaged.

• The installation of the system in vehicles with endo-thermal engine must be performed on an idle engine:

during assembly, contact may occur with the parts of the engine or framework that are subject to heating

• Make sure not to damage connectors and wirings during assembly/disassembly.

• Make sure you don’t lose screws and washers inside the vehicle during installation

• During installation, make sure that no installed part interferes with the guidance devices of the vehicle or

with the pilot

CAUTION: A FAULTY INSTALLATION MAY RESULT IN SERIOUS DAMAGE TO

INDIVIDUALS AND/OR OBJECTS