Operation Manual

D30 EVO DASH rev. 1.0
2014 GET by Athena. All rights reserved
ENGLISH
36
12 DEVICE TABLES
The following tables summarize the components of the D30EVO Maya device, divided into groups:
D30EVO – Dash Channels Map
GROUP
Name
Type
Description
EVO
lic.
ADV
lic.
Misc
Register
MCFG
Bitmask
Allows to setup the number of active pages
(NPG parameter), the start page (PA
parameter), the backlight ascent (BK
parameter)


CAN
Bitmask
Allows to setup the speed of the CAN bus
(BAUD parameter) and the byte
transmission order (BO parameter)


SER
Bitmask
Allows to setup the speed of the serial bus
(BAUD parameter) and the byte
transmission order (BO parameter)


From
Usr_Ch00
to
Usr_Ch31
Usr_Ch..
String
Name of the configured channel (not
changeable by EVO license)


UCALX_...
Vector
Channel calibration vector


UCALY_...
Vector
Channel calibration vector


UCGFG1_...
Bitmask
Allows to setup the channel calibration type
(Calib parameter), the channel source
(RXTYP parameter) and allows to send it to
the desired bus (TXTYP parameter).


UCGFG2_...
Bitmask
Includes the required settings for the
channel transmission, such as frequency
(TXRATE parameter) and sign parameter
(SIGN parameter)


DBID
Value
Indicates the ID of receipt/transmission of
the channel (in hexadecimals) – valid for
channels on the CAN bus


DBSTG
Bitmask
Allows to setup the source byte of the
channel (SB parameter) and the length (DL
parameter)


USID
Bitmask
Allows to setup the source channel (valid
only if the channel is setup in transmission)
and whether calibration is applied

