Operation Manual

D30 EVO DASH rev. 1.0
2014 GET by Athena. All rights reserved
ENGLISH
34
11.3 Changing the alarm thresholds
The procedure for changing the alarm thresholds is identical to the one seen for the changing flash. You
should therefore insert the new values of the ATHR0_ALARM and ATHR1_ALARM scalars of the desired
Alarm group.
The figure illustrates the alarm threshold (55°C) of the engine temperature channel (TH2O) configured on the
Alarm_05 group
NOTES:
 The values may be changed independently in any page
 The groups of alerts may vary according to the configuration of the dashboard