Operation Manual

D30 EVO DASH rev. 1.0
2014 GET by Athena. All rights reserved
ENGLISH
26
9.6 Programming the D30EVO:
The procedure described below implies that the Maya is started on the device and the project (configuration)
is already loaded.
Operate as follows:
 Make sure that the device is connected to the PC.
 Click the Download to ECU button (included in the Communication menu) or on the icon included
in the Maya toolbar.
NOTE: besides the indicated methods, you may also use F4 functional key on the keyboard (enabling the
option Enable Hot keys... in the Maya Preferences) in order to recall the function.
 Program the device connected to the PC following the instructions showed by the message of the Maya
software.