Operation Manual

D30 EVO DASH rev. 1.0

ENGLISH

9.4 Downloading the configuration of the dashboard

Operate as follows:

 Start the Maya software clicking the corresponding icon twice

 Make sure that the device is connected to the PC.

 Make sure that the device viewed in the area of the Device Manager is consistent with the map you

intend to download. For this purpose, it may be useful to perform the command Get ECU Codes, that

helps identify the codes in the dashboard.

NOTE: if no device has been loaded, load one.

 Click the Read Map from ECU button (included in the Communication menu) or on the icon

included in the Maya toolbar.

NOTE: besides the indicated methods, you may also use F3 functional key on the keyboard (enabling the

option Enable Hot keys... in the Maya Preferences) in order to recall the function.

 Afterwards, the Maya reading command will ask you to select an engine map. The options (selectable

through a click of the left key of the mouse) are the following:

Application: the reading of the Application Map saved in the device will be launched – the downloaded

data may be viewed (and afterwards changed) within the Application tree of the Device Manager of the

Maya.

Map …: the reading of the selected map will be launched – the downloaded map may be viewed (and

changed) in the device tree.

All: the reading of all the maps included in the device memory will be launched – the downloaded maps

may be viewed (and changed) in the Device Manager tree of the Maya.

CAUTION: THE NUMBER OF MAPS OR THEIR NUMBERING MAY VARY ACCORDING TO THE

CONNECTED DEVICE

ALWAYS SELECT THE “ALL” OPTION