Operation Manual

D30 EVO DASH rev. 1.0

ENGLISH

9.3 Opening a project (configuration) file from the PC

Operate as follows:

 Start the Maya software clicking the corresponding icon twice

 Make sure that a device is loaded and that it is consistent with the project you intend to open.

 Click the Open Map Project… button (included in the File menu) or on the icon included in the Maya

toolbar.

NOTE: besides the indicated methods, you may also use Ctrl+M on the keyboard (enabling the option

Enable Hot keys... in the Maya Preferences) in order to recall the function.

 Select the desired project file. If the installation procedure is followed correctly, thus creating the

MayaWorkspace folder, the file should be included in the folder corresponding to the configuration type

included in the dashboard. For instance, a configuration for PREMOTO3 will be saved in:

MayaWorkSpace \ D30EVO \ PREMOTO3

 Click the Open button at the bottom left in order to load the selected file

 All the engine maps included in the project will be loaded in the device tree (visible in the area of Device

Manager); moreover, the engine map (identified by the green indicator of the tree) will also be enabled.