Operation Manual

D30 EVO DASH rev. 1.0
2014 GET by Athena. All rights reserved
ENGLISH
20
9.2 Connection of the dashboard to the PC
Operate as follows:
 Start the PC and the Maya software (if you have not done it already).
 Make sure you have correctly set up the communication port in the MAYA Preferences.
 Connect the programming cord to the PC (when the computer has a serial port).
 Connect the converter (if available) to a USB port of the PC and wait for Windows© to install the driver of
the new peripheral device (if required, follow the directions showed by the operating system).
 Connect the D30EVO dash to the programming cord by means of the dedicated connector:
PC
cavo di programmazione
Interfaccia
USB/seriale
(se presente)
code GL-0086-AA
MAIN
CONNECTION
TO A PC WITH
NO SERIAL
PORT
PC
programming cord
USB/serial interface
CONNECTION
TO THE PC
WITH A SERIAL
PORT
PC
programming cord