Manual

8
1)
Options / model variants
Original instructions
3.5 Fill up tank for Gerni
AntiStone (Anti-Scale)
1. Fill up Gerni Anti-Stone (Anti-
Scale)/water softener reser-
voir with the sample bottle
provided. Gerni AntiStone
(Anti-Scale) prevents any
deposits of scale and acts at
the same time as a corrosion
inhibitor.
For compatibility reasons, use
only the tested Gerni AntiStone
(Anti-Scale) which is available
as a six-pack of 1 liter bottles by
ordering part number 8466.
3.4 Fill up detergent tanks
1. Fill up detergent tanks (A) and
(B) with prediluted detergent.
Capacity see chapter 9.4
Technical Data
3.3 Install Crank handle
for high pressure hose
reel/cord reel
1. Pull cap of crank in arrow
direction.
2. Align tabs on crank with slot
in axle.
3. Put crank on axle of high pres-
sure hose reel/cord reel.
4. Fix crank by pushing the
cap.
A
B
3.6 Antiscale
The Gerni Antiscale dosing sys-
tem is set by the factory.
To adjust the water hardness we
recommend that the inlet water
is tested accordingly.
Use the schematic to find the
right dosage of No Scale/anti
stone and water, and add the
mixture to the antiscale tank.
Machine flow L/h Pump size ml/h ˚dH ˚f ˚e Dosage
900 35 0-12 0-21,5 0 - 15 1:1 = 17ml/h
900 35 12-30 21,5 - 53,7 15 - 37,5 Pure = 35ml/h
1000 35 0-12 0-21,5 0 - 15 1:1 = 17ml/h
1000 35 12-30 21,5 - 53,7 15 - 37,5 Pure = 35ml/h