Manual

9
1)
Options / model variants
Original instructions
3.8 Fill up fuel tank
With the machine cold:
1. Fill fuel tank from a clean con-
tainer with a fresh fuel, heat-
ing oil, DIN 51603-1 (without
bio diesel) or Diesel EN 590
NOTE!
At temperatures below 8° C, the fuel
oil begins to solidify (paraffin precip-
itation). This can lead to difficulties
in starting the burner. Before the
winter period either add a solidifica-
tion point / flow improver (available
from the fuel oil trade) to the fuel or
use winter diesel fuel.
3.9 Connecting the high
pressure hose
3.9.1 Machines with high
pressure hose reel
1. Put the quick connector of
the high pressure hose onto
the nipple on the axle.
3.9.2 Machines without high
pressure hose reel
1. Put the quick connector of
the high pressure hose onto
the nipple on the cleaner.
(Diesel with a bio diesel con-
tent up to 7%).
Diesel according to EN 590
(up to 7% bio diesel) can be
used with the following re-
strictions: Maximum storage
time in high pressure cleaner
diesel tank: 1 month. Diesel
stored externally for more
than 6 months is not allowed
to be filled into Gerni high
pressure cleaners. Diesel
EN 590 is not recommended
for use in HPW's at an ambi-
ent temperature below 0°C.
Diesel EN 590 from an open
container must not be used.