Users Manual

NOTED: If you restore the monitor to Factory Reset, the camera paired before will be
deleted. It's required to pair the camera and monitor again for image streaming.
Therefore, please do it with caution.
10 11
This function is to set System Date & Time, LCD Auto Off, and Factory Reset.
SYSTEM SETTINGS
This function is to comfort your baby when needed. The volume and type of
each lullaby are distinctive, please select the best one for your baby.
You can also quickly turn on the function of playing lullaby by pressing “ ”
in the monitoring image.
“ ”mean loop playing the lullabies in the system; “ ” means you shut down
the function.
LULLABIES
System Date & Time
1. Press “ “ to enter the menu page.
Choose ” “ and press ”OK”.
2. Select “System Date & Time“ ,
then press ”OK”.
3. Press ” “ and ” “ to change the
value. Press “ “ to finish setting.
4. Press ” “ and ” “ to Switch to the
next item; Press “ “ to finish setting.
System Date & Time
Auto LCD Off
Factory Reset
2020 / 08 / 20
10
:
48
2020 / 08 / 20
11
:
25
LCD Auto Off
1. Select “LCD Auto Off“, press ”OK”. 2. Select the item you want.
System Date & Time
Auto LCD Off
Factory Reset
1M 2M 3M 4M
OFF
Factory Reset
1. Select “Factory Reset“, press ”OK”. 2.Confirm “YES” to reset.
System Date & Time
Auto LCD Off
Factory Reset
Reset to default setting
YES NO
VOX
1 2 3
4
OFF
OFF
1. Press “ “ to enter the menu page.
Choose ” “ and press ”OK”.
2. Select the lullaby you want; Select
“ ” to play the lullabies in a loop.
Tip: