Users Manual

The monitor has a voice operated switch, also known as VOX. If you enable this
function, it will turn on the screen when the sound over a certain threshold is
detected. There are 4 options to adjust the sensitivity of sound detection:
VOX SETTING
This function is to remind you of feeding your baby. OFF means you shut down
the function; 2 hour means it reminds you every 2 hours and so on for the
other options.
FEEDING TIMER
NOTED: This function is used in conjunction with "Auto LCD Off". For "Auto LCD
Off", please refer to "SYSTEM SETTING" on page 10.
1. Press “ “ to enter the menu page.
Choose ” “ and press ”OK”.
2. Select the item you want.
8 9
OFF , LOW , MEDIUM and HIGH .
1. Press “ “ to enter the menu page.
Choose ” “ and press ”OK”.
2. Select the item you want.
OFF
1H 3H 4H2H
4 cameras at most can be connected to one monitor. When you have more than
1 Camera Unit paired (For example 4). The following display modes are
available.
MODE 1:
When selects or or , CAM1, CAM2, CAM3 can display separately.
12
1 2
3 4
1
12
2
3 4
1 2 3
MODE 2:
When selects , CAM1, CAM2, CAM3 will split screen display.
MODE 3:
When selects , Two of CAM1, CAM2, and CAM3 are displayed on the left
and right side of split screen. There are totally 6 display modes, which can be
switched by pressing and button.
12
MODE 4:
When selects , scan camera function will be activated. It automatically cycles
through your paired camera channels to display each camera for 20 seconds.