Users Manual

You do not need to pair it again unless the Camera Unit loses its link with the

Monitor Unit or pair to a new Camera Unit.

If it shows “Lost Link!!!” after turning on the monitor, this is likely due to the far

disstance between the monitor and camera, or the unsuccessful factory

pairing. Please move the monitor closer to the camera, or manually pair the

monitor with the camera following the next section accordingly.

PAIR THE CAMERA

MENU SETTINGS

VOX

1. Press “ “ to enter the menu page.

Choose ” “ and press ”OK”.

3. Select “ “, then press ”OK”. you will

see the prompt paired.

NOTED: “About step 3”, a cyan-blue icon indicates that there is no camera paired

with this channel, while a red icon indicates there is a camera paired with this

channel.

2. Select “ “ , then press ”OK”.

1 3 42

Press PAIR on cam

2 4. Long press “Pair Button” on the top

of the camera.

5. if the pairing is successful, the monitor screen will prompt “PAIR SUCCEED”.

Pair Button

DELETE CAMERAS

1. Press “ “ to enter the menu page.

Choose ” “ and press ”OK”.

2. Select “ “ , then press ”OK”.

3. Select a paired camera “ “ , then

press ”OK”.

1. Press “ “ to enter the menu page.

Choose ” “ and press ”OK”.

2. Select “ “ , then press ”OK”.

3 421

4. Your camera is deleted.

6 7

CAMERAS DISPLAY MODE

VOX