User's Manual

CLEANING & MAINTAINING
THE COMBINATION FILTER
The air puri er should be cleaned at least once every month and the outer Pre-/
Charcoal Filter attached to the HEPA Filter should be cleaned every month. More
frequent cleaning may be required depending on environmental conditions.
PRE-/CHARCOAL FILTER
Remove the Pre-/Charcoal Filter from the velcro strips on the True HEPA Filter. (Fig. 6)
Clean with the brush attachment of your vacuum cleaner. This will remove lint and dirt.
After cleaning, reattach the Pre-/Charcoal Filter to the True HEPA Filter.
TRUE HEPA FILTER
Remove the Combination Filter from the back of unit.
Remove the Pre-/Charcoal Filter to expose the HEPA Filter.
When the HEPA Filter turns from white to grey or black it should be replaced with a
new one. If the HEPA Filter is still white, it does NOT need to be replaced.
AIR PURIFIER
Use a clean, dry, soft cloth to wipe the external surface of the unit.
NOTE: Do NOT stick any foreign objects or your  ngers inside of the unit.
CAUTION: Do NOT use gasoline, benzine, thinner, harsh cleaners, etc. on
and/or in the unit while cleaning as they will damage the product.
NEVER use alcohol or other solvents.
IMPORTANT: Do NOT try to wash and re-use the Combination Filter. Please contact
Guardian Customer Service at 1.866.603.5900 or visit us at www.guardiantechnologies.
com to purchase a replacement  lter.
Replacement  lter: FILTER C (FLT5000)
NOTE: The Combination Filter is one  lter. The multiple layers include: the Pre-/Charcoal
Filter and the True HEPA Filter.
FIG. 6
E-11
E-10
Bulb is NOT visible
until the UV-C METAL
SHIELD has been
removed.
FIG. 4
FIG. 5
TWIST BULB
1/4 TURN TO
REMOVE.
TWIST BULB
1/4 TURN TO
REINSTALL.
IMPORTANT: The UV-C Bulb should be replaced every 10 - 12 months depending on use.
Please contact germguardian Customer Service at 1.866.603.5900 or visit us at
www.guardiantechnologies.com to purchase a replacement bulb.
Replacement UV-C Bulb: LB5000.
4. The UV-C Bulb is removed by rotating it one quarter turn and then sliding it out of the
top and bottom lamp sockets (Fig. 4).
INSTALLING & REMOVING UV-C BULB
5. The UV-C Bulb is reinstalled by sliding it into the top and bottom lamp sockets and
rotating it one quarter turn (Fig. 5).