User Manual

P.9

Installation Instructions

Before You Install the Induction Cooker, Make Sure That

• The work surface is straight and level, and no other structural components interfering with the

space required.

• The work surface is made of heat-resistant materials.

• If the induction cooker is installed above an oven, the oven has a built-in cooling fan.

• The installation will comply with all clearance requirements and applicable standards and

regulations.

• A suitable isolating switch providing full disconnection from the mains power supply is incorporated

in the permanent wiring, mounted and positioned to comply with the local wiring rules and

regulations.

• The isolating switch must be of an approved type and provides a 3 mm air gap contact separation

in all poles (or in all active [phase] conductors if the local wiring rules allow for this variation of the

requirements).

• The isolating switch will be easily accessible to the user with the induction cooker installed.

• You consult local building authorities and by-laws if in doubt regarding the installation.

• You use heat-resistant and easy-to-clean nishes (such as ceramic tiles) for the wall surfaces

surrounding the induction cooker.

Air Inlet

Air Outlet

760mm

≥ 110mm

20mm

5mm

Correct

Wrong

5mm