User Manual

P.16
Troubleshooting
If an abnormality occurs, the induction cooker will enter the protective state automatically and display
corresponding protective codes:
Error Message Possible Reason Solution
E0
There is no cookware on the heating area, or the
cookware is not suitable for induction cooker
Use suitable cookware
E1
Heat sensor malfunction or the product is
overheated
Make sure the air inlet and air
outlet are not blocked, switch off
the product and let it cool down
for several minutes. If error code
persists, please contact German
Pool Customer Service and
Repair Centre
E2
Sensor malfunction or dry-heat protection
is activated
Remove the cookware and let
the hob completely cool down.
If error code persists, please
contact German Pool Customer
Service and Repair Centre
E3 Voltage protection
Check if the input voltage is
normal. If voltage is normal
but error code persists, please
contact German Pool Customer
Service and Repair Centre
WARNING!
The above are the possible reasons and suggested solution of some common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the
induction cooker and please contact the supplier.