User Manual

P.14
Operating Instructions
Start Cooking
1. Connect hob to the power source. The product enters locked status,
indicator icon lights up
constant, all other keys are inoperable, including ON/OFF key.
2. Long-press for 3 seconds to unlock the hob, then press . Product enters standby
status, display panel shows “----“. If the hob does not receive any further command in 30 seconds,
it will automatically lock again.
3. In standby status, press to start cooking.
4. In working status, cooking power can be adjusted by pressing MAX/MIN or sliding the slider
control.
POWER DOWN
Note:
Make sure your cookware can be used with induction cookers. Place cookware on the cooking
area of the hob. Make sure the bottom of the cookware and the surface of the cooking area are
clean and dry.
Note:
(For GIC-228DB)
When one hob is operating at 2000W or above, the other hob will not have any power.
Note:
• The two hobs have their own independent 13A BS plug, and the BS plug only applies to
that corresponding hob, meaning the left BS plug only supplies power to the left hob, with
the maximum power output being 2600W, and the same principle applies to the right
hob. When both BS plugs are plugged in, both hobs become operable, and the total power
output is 5200W.
• Before cooking at maximum power output, please make sure your power mains can
support this load.
• The two hobs on this model do not have power-sharing function.
POWER UP