User Manual
P.11
Installation Instructions
Connecting the Induction Cooker to the Mains Power Supply
This induction cooker must be connected to the mains power supply only by a suitably qualied person.
Before connecting the induction cooker to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by the induction cooker.
2. The voltage corresponds to the value given in the rating plate.
3. The power supply cable sections can withstand the load specied on the rating plate.
Cautions:
• To connect the hob to the mains power supply, do not use adapters, reducers, or
branchingdevices, as they can cause overheating and re.
• The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75˚C at any point.
• Check with an electrician whether the domestic wiring system is suitable without
alterations. Any alterations must only be made by a qualied electrician.
• If the cable is damaged or to be replaced, the operation must be carried out the by an
after-sale agent with dedicated tools to avoid any accidents.
• If the appliance is being connected directly to the mains an omnipolar circuit-breaker must
be installed with a minimum opening of 3mm between contacts.
• The installer must ensure that the correct electrical connection has been made and that it
is compliant with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and replaced by authorized technicians only.