User Manual

P.10
Installation Instructions
When You Have Installed the Induction Cooker, Make Sure That
• The power supply cable is not accessible through cupboard doors or drawers.
• There is adequate ow of fresh air from outside the cabinetry to the base of the induction cooker.
• If the induction cooker is installed above a drawer or cupboard space, a thermal protection barrier
is installed below the base of the cooker.
• The isolating switch is easily accessible by the user.
Fastening the Cooktop to the Bench
1. Turn the cooktop upside down and place it on a soft surface.
2. Spread the seal around the edges of the ceramic glass with the adhesive side facing down, making
sure that the whole perimeter is sealed. Cut off any excess material.
3. Using a sharp cutter or trimmer knife, trim the excess sealing material around the edge of the
cooktop. Take care not to damage the benchtop.
Before Locating the Fixing Brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the
controls protruding from the hob.
Cautions:
• The induction cooker must be installed by a qualied personnel or technician. We have
professionals at your service. Please never conduct the operation by yourself.
• The induction cooker will not be installed directly above a dishwasher, fridge, freezer,
washing machine or clothes dryer, as the humidity may damage the cooker electronics
• The induction cooker shall be installed such that better heat radiation can be ensured to
enhance its reliability.
• The wall and induced heating zone above the table surface shall withstand heat.
• To avoid any damage, the sandwich layer and adhesive must be resistant to heat.