Safety data sheet

ManualsBrandsGERMAN REPRAP Manuals3D PrintingFilament PLA plastic 1.75 mm Ecru (soft) 750 g

Safety Data Sheet

according to EU Directive 1907/2006

Product name: PLA Soft

Date of issue : 01.07.2008 Version: 2.0

1. Identification of the substance/preparation and of the company

1.1 Trade name:

PLA Soft

1.2 Use of the product:

Biodegradable resin for manufacture of films

1.3 Supplier:

2. Hazards identification

2.1 Classification: Not dangerous according to Directive 67/548/EEC

2.2 Special advice on hazards: Danger of burns in contact with hot polymer.

Hazardous vapours in case of burning.

3. Composition / information on ingredients

3.1 Chemical characteristics: Biodegradable polymer-blend based on polylactic acid (PLA),

contains a copolyester and additives.

Compostable acc. DIN EN 13432

3.2 CAS no: PLA: 9051-89-2

3.3 Additional information: no harmful ingredients

4. First-aid measures

4.1 On skin contact: In case of contact with molten polymer immediately cool

the skin with cold water. Medical aid may be required to

remove adhering material and for treatment of burns.

4.2 After inhalation: After inhalation of decomposition gases or dust remove

patient to fresh air. Contact a doctor in case of discomfort.

4.3 On ingestion: No effects known. Rinse mouth with water and drink

more water. Contact a doctor in case of discomfort.

4.4 On eyes contact: Rinse open eyes thoroughly with wate

5. Fire-fighting measures

5.1 Suitable fire extinguishing media: water, dry chemical extinguisher, foam, carbon dioxide

5.2 Special exposure hazards: During incomplete combustion release of carbon monoxide,

tetrahydrofurane and decomposition products possible.

5.3 Special protective equipment: Self-contained breathing apparatus

5.4 Remark: Accumulations of dust can be inflammable.

e 1/3

p g

Ɣ plastics - made by nature!

Summary of content (3 pages)

PAGE 1
Safety Data Sheet according to EU Directive 1907/2006 Product name: PLA Soft Date of issue : 01.07.2008 Version: 2.0 1. Identification of the substance/preparation and of the company 1.1 Trade name: PLA Soft 1.2 Use of the product: Biodegradable resin for manufacture of films 1.3 Supplier: 2. Hazards identification 2.1 Classification: Not dangerous according to Directive 67/548/EEC 2.2 Special advice on hazards: Danger of burns in contact with hot polymer. Hazardous vapours in case of burning.
PAGE 2
Safety Data Sheet according to EU Directive 1907/2006 Product name: PLA Soft Date of issue : 01.07.2008 Version: 2.0 6. Accidental release measures 6.1 Personal precautions: 6.2 Methods for cleaning up: Use suitable protective clothing. Avoid eye contact and inhalation of dusts. Keep ignition sources away. Sweep up material and place in a container, risk of slipping. Avoid ingress of material into drainage systems. 7. Handling and storage 7.1 Handling: 7.2 Storage: Avoid contact with molten polymer.
PAGE 3
Safety Data Sheet according to EU Directive 1907/2006 Product name: PLA Soft Date of issue : 01.07.2008 Version: 2.0 11. Toxicological information 11.1 Local irritation: Dust can cause irritation of eyes, respiratory organs and skin. After ingestion stomach pain or nausea are possible. 11.2 Other remarks: Based on our state of knowledge and experience no injurious health effects are expected if product is properly handled for the designated use. 12. Ecological information 12.