Safety data sheet

ManualsBrandsGERMAN REPRAP Manuals3D PrintingFilament Smart ABS 1.75 mm Ecru 750 g

Product Name: smartABS Resin Natural Revision Date: 2006/10/24

Print Date: 30 Jun 2010

* Indicates a Trademark

Page 1 of 6

Styron LLC

encourages and expects you to read and understand the entire (M)SDS, as there is

important information throughout the document. We expect you to follow the precautions identified in

this document unless your use conditions would necessitate other appropriate methods or actions.

1. Identification of the substance/preparation and of the company/undertaking

Product Name

smartABS Resin Natural

Use of the substance/preparation

A thermoplastic resin. Raw material for industrial conversion to articles or goods.

COMPANY IDENTIFICATION

Styron LLC

1604 Building

48674 Midland, MI

USA

Customer Information Number: 800-258-2436

EMERGENCY TELEPHONE NUMBER

24-Hour Emergency Contact:

989-636-4400

Local Emergency Contact: 00 44 155 37 61 251

2. Composition/information on ingredients

Component Amount Classification: CAS # EC #

Acrylonitrile/butadiene/

styrene resin

>= 99.5 % Not classified. 9003-56-9 Polymer

3. Hazards Identification

This product is not classified as dangerous according to EC criteria.

4. First-aid measures

Safety Data Sheet

Summary of content (6 pages)

PAGE 1
Safety Data Sheet Product Name: smartABS Resin Natural Revision Date: 2006/10/24 Print Date: 30 Jun 2010 Styron LLC encourages and expects you to read and understand the entire (M)SDS, as there is important information throughout the document. We expect you to follow the precautions identified in this document unless your use conditions would necessitate other appropriate methods or actions. 1.
PAGE 2
Product Name: smartABS Resin Natural Revision Date: 2006/10/24 Eye Contact: Flush eyes with plenty of water; remove contact lenses after the first 1-2 minutes then continue flushing for several minutes. Only mechanical effects expected. If effects occur, consult a physician, preferably an ophthalmologist. Skin Contact: If molten material comes in contact with the skin, do not apply ice but cool under ice water or running stream of water. DO NOT attempt to remove the material from skin.
PAGE 3
Product Name: smartABS Resin Natural Revision Date: 2006/10/24 Storage Store in accordance with good manufacturing practices. 8. Exposure Controls / Personal Protection Exposure Limits None established Personal Protection Eye/Face Protection: Use safety glasses. Safety glasses should be consistent with Directive 89/686/EEC Category 2. If there is a potential for exposure to particles which could cause eye discomfort, wear chemical goggles.
PAGE 4
Product Name: smartABS Resin Natural Revision Date: 2006/10/24 Stable. Conditions to Avoid: Avoid temperatures above 300°C (572°F) Exposure to elevated temperatures can cause product to decompose. Incompatible Materials: None known. Hazardous Polymerization Will not occur. Thermal Decomposition Decomposition products depend upon temperature, air supply and the presence of other materials. Processing may release fumes and other decomposition products.
PAGE 5
Product Name: smartABS Resin Natural 13. Revision Date: 2006/10/24 Disposal Considerations For uncontaminated material the disposal options include mechanical and chemical recycling or energy recovery. In some countries landfill is also allowed. For contaminated material the options remain the same, although additional evaluation is required. For all countries the disposal methods must be in compliance with national and provincial laws and any municipal or local by-laws.
PAGE 6
Product Name: smartABS Resin Natural Revision Date: 2006/10/24 Styron LLC urges each customer or recipient of this (M)SDS to study it carefully and consult appropriate expertise, as necessary or appropriate, to become aware of and understand the data contained in this (M)SDS and any hazards associated with the product. The information herein is provided in good faith and believed to be accurate as of the effective date shown above. However, no warranty, express or implied, is given.