Operation Manual

FUNCTIONS & FEATURES ... (continued)
*To each of the channel, you can select Fine Search to make the current channel fine.
* Select Save to save your setting.
* If you donot need t;he current channel, select Skip and press VOL+/VOL- to confirm it, the
channel will be skipped.
4.How to Sort Channels?
When all channels have been searched, if you
want to sort them in your favorite order. we
rename "cannel 1" in the OSD to "Program
place" and"cannel 2" to "new program place".
You can do as followed: 
Step1: confirm "program place" select the program
that you will move.
Step2: confirm "new program place" select the
new program place.
Step3: press VOL+/VOL- to confirm "Exchange"
to save this setting. If you will sort the
next, go to "step1".If you has finished
the setting press menu.
5.How to setup a timer in TV mode?
Highlight the 5th icon, then press VOL+/VOL-,
then input Current Time, ON Time, OFF Time and
Select Channel respectively. The ON Time / OFF
Time refers to your selected channel starts / stops
playback time. To realize this function make sure
your TV is in the standby mode, not disconnected from the power.
6. How to configure your TV?
The Input enables you to select the four signal
sources:TV, Video, S-Video and SCART. It must
accord with the current connection.
The Language enables you to select your favorite
OSD language.
The Lock enables you to lock your TV.To unlock it
press any key on the remote, otherwise you cannot
watch TV.
The Reset enables you to reset all the setting to the
default in factory
VCR :The VCR option when set to ON will improve the picture from any VCR connected to the TV.
If you have a DVD connected to the TV,
set this option to OFF.
AV MODE(SC Video,SC SVIDEO,SC YCbCr,SC RGB,Video,S-Video)
There are 3 function classifications only in the
main menu.
1.Image adjustment factors
2. Audio adjustment factors
3.Configure
The 3 operations are same as that of the TV mode.
USER MANUAL GTV2021
11