Installation Guide

4. INSTALL A NEW FLUSH VALVE.
1. Insert new flush valve in opening at bottom of the tank.
2. Rotate flush valve position in tank, so re-fill water line can connect to
overflow tube. Overflow tube should face fill valve.
3. Re-attach the spud nut on the bottom of the tank and tighten.
4. Ensure proper seal between toilet tank and flush valve gasket
5. Re-install or replace rubber tank to bowl gasket. Make sure the bevel side
of the gasket will connect to the toilet bowl.
6. Re-install tank assembly on toilet bowl.
7. Re-connect water supply line to toilet tank.
8. Turn on water.
9. Test flush toilet to ensure proper operation.