Datasheet

74
Gepco International, Inc. P.800.966.0069 P. 847.795.9555 F. 847.795.8770 www.gepco.com
CAMERA & FIBER OPTIC CABLES
CAMERA & FIBER OPTIC CABLES
Extra-durable 12mm Hybrid Fiber cable for improved dura-
bility in High Definition camera to CCU interconnects. In
addition to the steel strength member and nylon-
based polymer fiber coating, each fiber optic ele-
ment has a Kevlar wrap and PVC jacket for
greater strength and protection. For the power
elements, HDC120P utilizes two auxiliary con-
ductors for streamlined termination, thereby
reducing the possibility of electrical faults.
All copper elements now feature heat-
resistant PE insulation and are shielded
by a dense 95% copper braid. For
additional durability, the outer jacket is
made with an extra-tough
polyurethane compound that is
exceptionally abrasion and puncture
resistant.
12mm Heavy-duty Hybrid Fiber Optic
Features & Benefits
Ultra-low Attenuation
SMPTE 311M Compliant
Single-mode Optical Fibers with
Kevlar & PVC Jackets
Proprietary Fiber Coating for
Increased Tensile Strength
Four Large-gage Copper
Conductors
Heat Resistant
Strength Member for Additional
Durability
Applications
High Definition Camera to CCU
Interconnect
Portable Cables
Studio or Remote Environments
Mechanical Specifications (Components)
Component Number Type Insulation (Type, OD) Color Code
Optical 2
Single-mode Fiber Optic
(8.3 µm Mode Field, 125 µm Cladding)
CPE Fiber Coating,
Kevlar Wrap,
Tight Tube PVC Jacket,
.062” Finished O.D.
One Blue, One Yellow
Signal 2 24 AWG (19x36) Stranded TC PE, .044” One Red, One Gray
Auxiliary 2 16 AWG (65x34) Stranded TC PE, .084” One White, One Black
Strength Member 1 16 AWG Stranded Steel PVC, .087” One White
Mechanical Specifications (General)
Part # Nominal OD Master Jacket (Type, Colors) Overall Shield Approx. Weight
HDC120P 12.0mm Polyurethane, Black 95% TC Braid 135 lbs/Mft
Heavy-duty 12mm Hybrid Fiber Camera Cable
Electrical & Optical Specifications
Fiber
Attenuation
Signal
Conductor
DCR
Power
Conductor
DCR
Shield
DCR
Insulation
Resistance
(Power or Signal)
Dielectric
Strength
(Power or Signal)
Operating
Temperature
SMPTE
Standard
<0.70 dB/km
@ 1310/1550nm
23.8 S/Mft 4.5 S/Mft 2.6 S/Mft >10M S/km
3000 Volts RMS
@ 20°C, 60Hz for 1 min.
-40°C to +75°C
(@ 0 to 95% humidity)
311M Compliant
(Meets or Exceeds)