User's Manual

Important notes:
Use only the power adaptor attached with the product. Use unauthorized power adapter
may cause damage to your IP Camera.
IP Camera terminal shall be installed in an indoor environment where the rain or snow
could not pour it.
Do not touch the lens of the IP Camera at will. The optimum focus range has been set
before it is delivered out of the factory. If you turn the lens, it may cause incorrect focus
and vague images.
Do not turn the Pan/Tilt by force as it may cause damage to internal components of the
Pan/Tilt.
Do connect your mobile device to local Wi-Fi network firstly before initially installation of a
new camera.
RESET BUTTON functions when it was pressed and hold for at least 8 seconds.
Blue LED status:
Flash fast: Device automatic configuration. At this time, you can’t operate the device.
Flash slowly: Waiting for a Wi-Fi connection. At this time, you can find the camera SSID in
the Wi-Fi list and start to connect the camera.
Light on and no flash: Working condition. At this time, the camera has been connected to
a local Wi-Fi network. You can view and control the camera.